60V 72V 45A 1800W-2000W eBike Rear Wheel Conversion Kits with UKC1 Color Display 7-Speed Threaded Freewheel 20″, 24″, 26″, 27.5″, 700C, 29″ Rear Wheel

Price: $469.99
(as of Nov 18, 2023 14:59:50 UTC – Details)

60V 72V 45A 1800W-2000W eBike Rear Wheel Conversion kits with Display 7-speed threaded freewheel
Motor power: 60V/72V 1800-2000w
Axle: 10mm* M14mm
Type: Rear motor
Voltage：60V/72V
Wheel Size Options: 20″/24″/26″/27.5″/700C(28″)/29″
Magnet Height：35mm
Design: Brushless Gearless DC Hub Motor
RPM/min: 550
Cable size: 3.0mm2
Max torque: 40N.M
Max Efficiency: >=88%
Rear Fork Dropout Width Requirement(7-speed Freewheel): 142mm
Brake: Disc brake
Parts Included: eBike Rear Motor Wheel (with 7-speed freewheel, without Tire and tube), 3-mode Sine Wave Controller, Color Display UKC1, Half-bar Twist Throttle with Key/Lock, Brake Levers, PAS, Controller Bag
Motor N.W: 7kgs
FAQ:
1. How shall I match my motor for first time use? (Very Important)
1). Lift your motor wheel off ground (very important)
2). Connect Self-learning plug 6-8 seconds
3). You will see motor wheel rotate slowly
4). Please check whether rotation direction is correct
(a). If correct direction, then keep 6-8 seconds, then disconnect
(b). If reverse direction, then disconnect and plug again till get correct rotation direction, then keep 6-8 seconds, then disconnect
5). Motor and Controller Pairing finished!

60V/72V 1800-2000W Brushless Gearless DC Motor, High Motor Efficiency: >88%
48-72V 45A Sine Wave Controller, support 3-mode (hall sensor mode, non-hall mode, self-learning) and smart match with each motor through self-learning, works with high efficiency, less noise, and lower energy consumption
Controller multi functions: Work with hall sensor mode or non-hall mode, smart match with different motor, 5-speed level for throttle and PAS, Speed limit, Reverse, Cruise, Push Assistant, Anti-thief, Regenerative Braking, Electric Braking and etc