NBpower 2020 New The Integration of Electric Bike/Scooter/Ebike Kit Pedal Assist Sensor PAS System-Easy Install More Durable

Price: $24.98
(as of Nov 18, 2023 15:21:49 UTC – Details)

Functions and Features:
1. Uses the integration of dual hall detection elements and the built-in one piece internal sensor disc. Much easier to install and keeps twigs, leaves, rocks from breaking your sensor disc. You can also feel the improved smoothness of your pedal assist.
2. Compared with the traditional 2 piece sensors that are fragile and and get messed up so easy this new one piece type is very stable and durable with high sensitivity and stable signal. ——Works with all controllers that have a plug in for PAS sensor disc.
3. Output 12 signals with fast power-assist response speed, and it can automatically identify the positive rotation and the reverse rotation of the pedal.
4. The installation is much faster and easier than old type sensors. You Don’t Need to remove the BB bearing cap ! (which needs special tools) You only need to remove the Crank center bolt to install. ITS very difficult to remove most Bikes BB bearing cap ! Often impossible ! This sensor does not need the removal of bearing cap screw.
5. Standard interface: SM-3A ; We can change the plug in if you send us a picture of your plug ! Will work if your controller has any type of PAS sensor plug in.
6. KT-V12 Dual Hall assist sensor uses the left installation mode, during the installation, it’s simply needed to remove the left crank, and install the sensor in an electric bicycle axis according to the diagram, then install the crank back into place to complete the sensor installation. BUT can also be used on the right side of crank if your bike has the space there.

Compared with the traditional separation sensor, magnetic disk and magnetic sensors to achieve coaxial motion, high sensitivity, signal stability;
12 signal output, power-assisted response speed, can automatically identify the pedal when the forward and reverse;
Convenient installation and removal. Sensor left and right side of the installation of two models, the left model KT-V12L, right model KT-V12R.
Works with all controllers and used for all electric ebike