700C Rear Wheel Electric Bicycle Wheel Kit Waterproof Rear Wheel Ebike Hub Motor Kit 48V 1500W E-Bike Conversion Kit with LCD Display PAS Disc Brake Two Torque Arms (Battery & Tire Not Included)

Price: $327.11
(as of Nov 17, 2023 05:32:09 UTC – Details)

Details
Brake Handles: This set includes one pair of brake handles that can be mounted on the front of the bike. It cuts power and brakes while riding to ensure the rider’s safety.
Non-slip Handles: This set comes with two very comfortable non-slip handles. One of them is the drive handle. Twist it and then the electric bike will move forward.
Rear Wheel: This is a rear-wheel conversion kit. We provide a 24.92inch rear wheel (without tire) for the conversion.
LCD: This kit has an LCD that shows the power, mileage, speed, fault, gear and mode of the e-bike. So you can observe the operation of your bike.
Application
This kit is mainly used to convert ordinary bicycles into electric bicycles. It is suitable for cyclists, commuters, cycling enthusiasts, students, takeaway workers, etc.

Specification
Color: Black
Material: Aluminium, Iron and Copper Magnets
Wheel Type: Rear Wheel
Voltage:48V
Power:1500W
Motor Type: Brushless and Gearless 205 Series Wheel Motor
Number of Hall Sensors: 3
Rated Speed: 500 rpm
Flat Fork Width Requirement: Min.13.5cm/5.31inch
Brake: Disc Brake Swivel Type For 6 Screws
Corresponding Controller: 48V, 1500W Controller
Efficiency: ≥82%
Wheel Speed of 700c Motor: 58-60km/h
Battery: Not Included
Tire: Not Included
Drive Type: Handle-driven, Pedal-driven
Gross Weight: 10.5kg/23lbs
Net Motor Weight: 7.5kg/16.5lbs
Maximum Load Capacity: 150kg/331lbs
Motor Cable Length: 80cm/31.5inch
Wheel Diameter: 63.3cm/24.92inch
Motor Diameter: 24.2cm /9.53inch
Motor Thickness: 13.5cm/5.31inch
Motor Shaft Length: 20.95cm/8.25inch
Package Size: 65*65*23cm/25.6*25.6*9.1inch

Package Includes
1* 700c 48v 1500w Rear Motor Wheel
1* Brushless Controller
1* Swing Handle
1* Regular Handle Cover
1 Pair* Power-off Brake Handles
1* Controller Bag
1* Boost Sensor
1* Variable Speed Flywheel
1* LCD Display
2* Torque Arms
Other Accessories for Installation

Notes
1. This product is only suitable for two-wheeled bicycles.
2. Be sure to use lead-acid batteries or lithium batteries of a corresponding voltage. Besides, the batteries are not included.
3. This package only contains the wheel. The tire is not included.
4. The speed of this motor wheel is related to the wheel size, road conditions, battery condition, guest load, wind speed, etc. So please refer to the actual speed of your riding.
5. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
[Powerful & Waterproof Wheel Motor]: This e-bike rear wheel conversion kit features a 48V 1500W brushless and gearless hub motor for efficient operation. The powerful motor allows the e-bike to reach speeds of 58-60km/h. The motor cables are all waterproof and can prevent the risk of electricity leakage due to rain. It increases safety
[Dual Drive, 5 Speed Gears & Low Noise]: After converting your bicycle with our conversion kit, your bike can be both pedal-driven and electrically driven by turning the handlebars. 5 Adjustable speed gears. You can choose the right gear according to your riding habits. The motor in this kit has low noise. So it will not make a lot of noise to disturb you when you’re riding e-bike
[Comfortable PAS System & Accurate LCD]: The Pedal Assist System (PAS) is very sensitive, allowing you to ride without throttle response. A high efficiency of more than 82%, which can save you a lot of electricity. The LCD can show all the essential information, like, power, mileage, speed, fault, gear and mode of the e-bike
[Full Set of Conversion Accessories]: Quick release set-up. 1x 700c 48v 1500w Rear Motor Wheel, 1x Brushless Controller, 1x Swing Handle, 1x Regular Handle Cover, 1 Pair x Power-off Brake Handles, 1xController Bag, 1x Boost Sensor, 1x Variable Speed Flywheel,1x LCD Display , 2x Torque Arms