Grin Technologies Universal Rear Ebike Torque Arm, Thick 1/4 inch Stainless Steel. Protects Ebikes from Axle Spinout

Price: $46.89 - $42.98
(as of Nov 15, 2023 19:17:03 UTC – Details)

Grin Tech Universal Ebike Rear Torque Arm, thick laser cut 1/4 inch Stainless steel. Thick 1/4″ Stainless Plate. Made in Canada. FAQ: Q: Is one torque arm enough, or should I use two? A: For the torque arms we make with the thick ¼” axle plate, one is almost always more sufficient. Installing a 2nd torque arm will be tricky if you have a hub where the cable exits the end of the axle, as you’ll need to cut the connectors off the wire and then reattach them. If you are using a 3rd party torque arm that is made from thinner 1/8″ (3mm) metal plate, then we’d recommend doubling up and installing 2 arms. Q: Does it matter if I have 12mm or 14mm axles? A: No it does not matter, the torque arm plates are sized to accommodate a 14mm axle, but will fit a 12mm fine as well. With a 12mm axle, there is a small gap at the top or bottom of the slotted hole, but it is of no consequence and does not affect the spinout retention strength.
Thick laser-cut 1/4 inch stainless steel plate.
Made in Canada.
Suitable for M12 or M14 hub motor axles