WenDissy 700C 48V 1000W E-Bike Conversion Kit, Front Wheel E-Bike Cycling Hub Conversion w/Display Brushless Gearless Motor Set for DIY Road Mountain Bike Converting
(as of Nov 18, 2023 00:48:04 UTC – Details)
It is suitable for assembling and converting the 28-inch, 29-inch, and 700C front wheel of a bicycle. It is compatible with universal disc brakes and V-shaped brakes.
Suspension Type: Front
Special Feature: Electric
Assembly Requirement: Yes
Brake Type: Power-off Brake Lever (Applicable to V Brake, Disc Brake)
Motor Type: Brushless Gearless Motor
Gear Adjustment: 5 Gears
Recommended Battery: 48V 13AH or Higher Capacity Battery(Not Included)
Output Voltage: 48V
Minimum Flat Fork Distance: 100mm/3.94in
Display Size: 6.8*9.6cm/2.67*3.77in
Suitable Wheel Diameter: 28-inch, 29-inch, 700C
Loading Capacity: 120kg/264lbs
1* Motor Wheel
2* Brake Levers
1* Thumb Knob Handle
1* Controller Bag
1* Pedal Assist Sensor
1 * Motor Cord
1 * Winding Pipe
1* English Instruction Manual
All Accessories for Assembly
1.While connecting the controller to the wires, please make sure that you connect the right colors to the controller. Otherwise, the controller may be broken.
2.This kit does not include tires, batteries and chargers, which need to be purchased by customers. Please check the product size and practical voltage before purchasing.
3.It is suitable for the front wheel of a two-wheeled bike. It cannot be used for three-wheelers or multi-wheelers.
4.Please note that the motor can use hydraulic disc brake and wire disc brake, but the brake handle provided is wire disc brake.
5.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
Powerful Motor: With a 1000w brushless gearless motor, the electric bike kit can reach a maximum speed of 45-55KM/H. Compared to brush motors, it allows for smooth, fast acceleration and low noise operation without replacing the brush, thus making maintenance easier.
Dual Mode Controller: The motor works under Hall effect and non-Hall effect. If the component fails, the controller will switch to non-Hall effect mode and the motor will continue to work.
Enjoy Riding: The ebike conversion kit converts your bike into an e-bike for efficiency and convenience, allowing you to fully enjoy the fun of riding on your commute and short journeys.
Complete Set: This kit contains the complete range of accessories needed to convert your bike without you having to buy them separately. The matching kit will provide you with more consistent and stable performance.